How to Change Needle in Singer Sewing Machine

How to Change Needle in Singer Sewing Machine

With today’s hi-tech sewing machines, sticky needles and threading problems are a thing of the past. But that’s only if you know how to change a sewing machine needle correctly.

Replacing your sewing machine needle often is one of the most important ways to avoid common sewing problems such as uneven stitches, dropped stitches, or damaged fabrics. In the worst case, neglecting a dull or bent needle can lead to damage to your sewing machine.

Most people have a Brother or Singer sewing machine, but the needle replacement process is very similar for all machines. Once you learn how to change the needle on a Singer sewing machine, for example, you can easily take care of any other model. Plus, some of the best sewing machines for beginners are designed to make your job easier.


The outcome of your sewing project greatly depends on the quality of the needles. Use only high-quality needles as a result. The best outcomes on your SINGER sewing machine are always possible with original SINGER needles.

Change Needle.

Regular needle replacement is recommended, especially when sewing encounters wear or issues. Are there any stains on the fabric? If the sound of the needle puncturing the fabric during sewing can be heard, the needle may be worn out.

If the needle is bent (A) or if its tip is damaged (B) or blunt (C), you should discard it and replace it with a new one.

As a rule of thumb, after 4 projects or should be replaced after about 16 hours of sewing. It is also important that you use the right needle for your fabric use.

Change Needle

1. Use the opening in the leveling plate to hold the needle.

2. Loosen the needle screw. If required, use the screwdriver.

3. Remove the needle.

4. Insert the new needle using the leveling plate. Push in the new needle on the flat side backward as far as it will go.

5. Tighten the needle screw as tight as possible.

When should a needle be replaced?

How to Change a Sewing Machine Needle in Four Easy Steps

Needles for sewing machines are made to be changed rather frequently. A fresh, sharp needle makes it easier to puncture the fabric and produces a beautiful stitch. The usual rule for how frequently a sewing machine needle should be changed is as follows:

  • Every time you start a new project unless it’s a small project.
  • When changing fabrics, especially when changing to a denser fabric like leather.
  • After sewing continuously for 8-10 hours, and even more frequently when making quilts.
  • When you start noticing problems such as threads breaking often, needle popping, uneven stitches, or noticeable needle bend.

Needles for sewing machines are frequently used, thus there is no excuse for not replacing them as often as required. You may get a pack of 50 Universal Regular Point sewing machine needles for under ten dollars. It has a variety of needle sizes and is compatible with Singer, Brother, and Varmax machines.

What you will need

  • A new needle
  • A flathead screwdriver
  • A needle insertion tool

You must also understand how to change the needle on a Singer sewing machine because some models, such as those made by Singer, include a special insertion tool. Needles exist in a variety of shapes and sizes, and each one is made to work with a certain kind of fabric.

Choosing the Right Needle for Your Sewing Machine

Singer offers a handy guide to choosing the right sewing machine needle, with information on needle sizes, overlock needles, and needles for different types of fabrics.

In general, however,

  • A size 60/8 ball point needle is perfect for lightweight fabrics like organdy, georgette, silk, and chiffon.
  • Use a regular point size 70/10 or 80/12 needle for medium-weight fabrics like lycra, linen, or calfskin.
  • Heavier fabrics such as canvas, upholstery, denim, and vinyl should be sewn with larger wedge point needles, between sizes 90/14 and 120-19. To sew such heavy fabrics, you will need one of these heavy-duty sewing machines.

How to change a needle

Changing the needle on your sewing machine is easy. It has only four basic steps:

  1. Loosen the old needle using your fingers or a screwdriver.
  2. Pull the old needle down at an angle.
  3. Insert the new needle correctly.
  4. Tighten the needle adjustment screw.

How to remove an old needle

Before you begin, make sure your sewing machine is off, and then proceed to slightly loosen the needle clamp screw to release the old needle. Because Singer sewing machines employ wing nuts, changing the needle on a Bernina or Brother sewing machine is a little bit more difficult. You will require a screwdriver for this reason.

When the needle is free, pull it out obliquely and in your direction. To make more room for yourself, you can first remove the presser foot.

How to Insert a New Needle

The new needle is simple to insert, but you must position it properly to prevent any issues. Make sure the flat part of the new needle is facing the back when you hold it between your fingers and insert it into the needle shaft.

Push the needle up as far as it will go, then tighten the screw as hard as you can. If you have a release plate, the procedure is almost similar, except you will use the hole in the plate to hold and position the needle before placing it into the shaft.

How do I know if my sewing machine needs a new needle?

The sewing machine needle is dull when it begins making a thud or popping sound every time the blunt needle is having difficulty making a hole in the fabric. Also, turn off the machine and put your finger against the needle to check whether the needle is dull or sharp.

There are two main reasons why a sewing machine needle may be dull:

1) The needle may have been used too many times without being replaced. The life of a standard metal sewing machine needle ranges from 300-500 hours of sewing time, depending on the type of material you are working with, but if you have been using it for over 500 hours, then it is probably time to replace the needle.

2) Another reason could be that the wrong type of needle was used. Sewing machine needles are designed to work with different types of fabrics and materials, so make sure you use the correct type of needle for your project. For example, if you are working with a thick fabric then you will need to use a thicker needle, and if you are working with tights then you will need to use a finer, shorter needle. You can read more about how to determine which sewing machine needles are right for your projects in this blog post “How do I choose my sewing machine needles


To prevent pricking your fingers and tearing the fabric, it’s crucial to learn the proper way to change a sewing machine’s needle. The new needle must be positioned carefully so that it points in the appropriate directions and is sufficiently tight.

In order to maintain your project operating properly, you need also make sure you change the sewing machine needle frequently enough. It’s time to change your sewing machine needle if you’re experiencing issues like dropped stitches or damaged clothing. Just follow this guide.

Recent Posts